Stainless steel wire mesh

Stainless Steel Wire Mesh

1. Material: 304, 304L, 316, 316L

2. Weaving method: Plain weaving

3.Wire dia: 0.025-2mm 4.Width:0.1-6m 5.Length:1-30m

Material:SUS302,SUS304,304L,316,316L stainless steel wire

Weaving:Plain,Twill ,Dutch weave

Features: Acid resistant, alkali resistant, heat resistant, corrosion resistant.

Packing:in rolls or according to customer's requirements

Application:sieving and filtration in circumstances with acid and akali,such as slurry mesh in petroleum,sieving and

Type 304 often refers to as "18-8" (18% chromium, 8% nickel ). T-304 is the basic stainless alloy mostly commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit. Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.

Type 316: Stabilized by the addition of 2% molybdenum, T-316 is an "18-8" alloy. Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulfur-bearing water or halogen salts, such as chlorides are present. Type 316 L: Type 316 L is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.

Applications: Stainless steel wire mesh made from choice wires are used for separation of solids and clear filtration of liquids, as in the cleaning of fuels or hydraulic liquids, or in water treatment.

Square Opening Wire mesh in Stainless Steel: Plain weave stainless steel wire mesh:This is the most commonly used style of weaving. Every second wire is woven in, warp and weft wires run over and under each other alternately and interlock. Plain weave wire meshes guarantee optimum accuracy of apertures or filter pores. Plain weave wire mesh use wires that are thinner than the corresponding apertures.

Twilled weave stainless steel wire mesh:In cases where increased wire thickness is required in relation to the aperture size, which yield in the weaving process cannot withstand, this style of weave is chosen. At least two wires are woven in pairs, subsequently displacing a single wire. Mesh stability is controlled by a combination of aperture size and wire strength, and displays a slight diagonal trend. Using modern weaving technology, excellent stability of weave can be achieved.

Stainless steel wire mesh